卷帘机使用前注意事项 |
添加时间:2017/5/25 17:22:59 浏览次数: |
第一步:检查卷帘机外壳的完整性。卷帘机机头是一个密封的整体,在卷帘机使用之前,要仔细检查一下卷帘机机头的外壳是否存在因锈蚀、外力或其他原因导致的破裂或孔洞等,保证外壳无破漏。若发现有破漏的地方应拆下更换。 Step 1: check the integrity of the lid. Shutter machine head is a whole sealing, the shutter machine before use, carefully check the shutter machine head shell exists because of the rust, external force or other reasons lead to rupture or holes, etc., to ensure no broken shell. If any leaky areas are found, they should be removed and replaced. 第二步:检查机头的密封性。机头内部的齿轮需要机油润滑,如果一旦机头的密封性出现问题,一方面会出现各种杂音,另一方面水汽进入机头,导致齿轮锈蚀,可能会出现齿轮破裂。建议菜农可将机头周边的污物擦干净,然后察看接缝处的情况,若不出现新的油渍则证明密封性好。 Step 2: check the seal of the head. The inside of the nose gear need oil lubrication, if once head sealing problems, on the one hand can appear all kinds of noise, on the other hand, water vapor into the nose, lead to gear rust, gear fracture may occur. It is suggested that the farmers can clean the dirt around the head of the machine and then inspect the seams. If there is no new oil stain, the sealing is good. 第三步:检查机油油量。卷帘机机头在密封好的情况下一般不会出现机油下降的情况,但经过长时间使用后,机头内的机油必然降低,因此在对机头进行检查后要及时加强机头的密封,同时加注机油润滑。 Step 3: check the oil amount. Shutter machine head in sealed case does not generally a drop in the oil, but after long time use, oil must be reduced in the nose, so in a timely manner after the inspection on the nose to strengthen the seal head, at the same time filling oil lubrication. 第四步:检查刹车系统。直齿卷帘机机头一般采用刹车块或棘轮棘爪刹车,而这两部分多在机壳外部,容易出现锈蚀。在检查刹车系统时要针对棘轮、棘爪的运转情况及扭簧的弹性进行检测,保证刹车系统的正常。 Step 4: check the braking system. The head of a straight toothed roller blinker is generally used to brake the brake block or ratchet, and the two parts are mostly outside the chassis and are easily corroded. The braking system should be checked for the operation of ratchet, ratchet and the elasticity of the torsion spring to ensure the normal braking system. |
上一页 卷帘机存在哪些安全隐患 |
下一页 “外敷内治”给蔬菜大棚“降火” |
Copyright © 技术支持:遨游网络